RTO care

검출기 +2

NDIR

기기류2016. 6. 27. 12:39

Non-Dispersive Infra-Red (NDIR) detectors are the industry standard method of measuring the concentration of carbon oxides (CO & CO2).

Each constituent gas in a sample will absorb some infra red at a particular frequency. By shining an infra-red beam through a sample cell (containing CO or CO2), and measuring the amount of infra-red absorbed by the sample at the necessary wavelength, a NDIR detector is able to measure the volumetric concentration of CO or CO2 in the sample.

A chopper wheel mounted in front of the detector continually corrects the offset and gain of the analyser, and allows a single sampling head to measure the concentrations of two different gases.

The Cambustion Fast NDIR uses a unique sampling system, coupled to miniaturised NDIR technology to give millisecond response times.

The Cambustion Fast NDIR has two remote Sampling Heads controlled by a Main Control Unit, and is capable of sampling CO & CO2 simultaneously in two locations.

See Applications & Sample Data

   

출처: <http://www.cambustion.com/products/ndir500/operating-principle>

'기기류' 카테고리의 다른 글

사이클로이드 감속기  (0) 2016.06.28
Detector  (0) 2016.06.27
TCD  (0) 2016.06.27
CLD  (0) 2016.06.27
FID  (0) 2016.06.27

TCD

기기류2016. 6. 27. 12:38

TCD(Thermal conductivity Detector) : 열전도도 검출기

원리는 이론상 Gas와 시료의 열전도도의 차이를 측정한다. 구조는 단일 필라멘트로 Cell Volume은 3.5 ㎕이다. 주요 특징으로는 Sensitivity(주로 사용되는 검출기 중 가장 낮다), Selectivity(모든 화합물 검출이 가능한 일반적인 검출기), 시료가 파괴되지 않는 비파괴성 검출기이다.

운반기체로는 주로 헬륨(큰 열전도도와 불활성을 지녀 가장 일반적으로 사용하는 gas), 수소(감도는 높으나 사용상 주의를 요한다), 질소(수소 분석시 사용)을 사용한다.

   

TCD 사용 주의 사항

검출기가 켜진 상태에서 이동상 가스의 공급이 중단되면 필라멘트가 영구히 손상된다. 때문에 검출기를 켜기 전, 항상 Ref. 및 이동상 가스의 공급여부를 확인한다.

- 필라멘트가 산소에 노출 시 산화되므로 주의한다.

- 산이나 할로겐 화합물과 같은 활성 물질도 필라멘트를 손상시킨다.

- 온도가 낮아 야기되는 시료의 농축은 검출기 Cell을 오염시킨다.

- 오염원들은 Thermal Conditioning으로 제거한다.

   

출처: <http://01041902024.tistory.com/149>

   

   

검출기 : TCD-Methanizer-FID 동시 검출

Signal change 기능 => 한 크로마토그램으로 출력

1) 수소, 산소, 질소는 TCD에서 피크를 확인합니다.

(분자 구조상 C-H bond가 없으므로 FID에서 측정 불가)

2) 기타 탄화수소류 CH4, C2, C3, C4는 FID에서 측정합니다.

3) CO와 CO2는 메타나이저를 통과하여 CH4로 변화시켜 FID로 검출합니다.

즉 수소, 산소, 질소만 TCD에서 측정하며,

그 이 후의 CH4, CO, CO2, C2-C4는 FID에서 측정하는 시스템입니다.

'기기류' 카테고리의 다른 글

Detector  (0) 2016.06.27
NDIR  (0) 2016.06.27
CLD  (0) 2016.06.27
FID  (0) 2016.06.27
PID detector  (0) 2016.06.27